BOCOMAL FR Hoodie Review: A Heavyweight FR Work Hoodie Built for the Jobsite
BOCOMAL FR Hoodies Zipper Mock-Neck 14oz Heavyweight Fleece Fire Resistant Hooded Sweatshirts-NFPA2112 CAT2 Black
BOCOMAL
- FR MATRIALS：(Water Repellent and Oil Resistant)14oz cotton fleece FR treated,FR zipper brass,aramid sewing threads!Clear FR tag and UL lable.More FR info on inside tag about UL certification.We attached a small sample inside package for customers simple FR try
- FASION AND COMFORT:Windproof Mock-neck collar，rib-knit cuffs and waistband，keep you warm from the cold winter days.Heavy weight cotton fleece full zipper FR hoodies! This FR work hoodie provides a perfect and comfortable fit also soft and fashionable.We did Prewash/Preshrunk and wrinkle-free.The size is big&tall.
- ENSURE SAFETY AT WORK :This Hooded sweatshirt meets or exceeds the standards for HRC2,arc rating Atpv 22 calories/cm2 and the requirements of NFPA2112 standard on flame resistant garments for protection of industrial personnel against flash fire,2012 edition.NFPA70E ASTM F1506 and NFPA2112 CAT2 classified by UL!
- MORE USE TIME: UP TO 100 WASHES ,Our shirts has the appropriate level of protective gear and stays enforced up to numerous washes. You can wear and wash it over and over again for up to 100 times before FR still works.(NFPA2112,ASTM F1506,CAT II)
Quick Verdict
Pros
- HRC2 certified with arc rating of 22 cal/cm² and NFPA2112 CAT2 classification by UL
- 14oz heavyweight cotton fleece construction provides serious warmth in cold work environments
- Water repellent and oil resistant treatment handles spills and light rain on the jobsite
- Up to 100 wash cycles while retaining flame resistant properties
- Full brass FR zipper, aramid sewing threads, and windproof mock-neck collar for durability
Cons
- Sizing runs large and baggy – most buyers need to size down one or two sizes
- Only available in black, which shows dust, metal shavings, and grease more visibly than lighter colors
- The 14oz weight makes this hoodie quite warm – less suitable for mild or warm climates
Quick Verdict
The BOCOMAL FR Hoodie is a 14oz heavyweight flame resistant hooded sweatshirt that earns its place on any industrial jobsite where arc flash or flash fire hazards exist. It carries genuine HRC2 and NFPA2112 CAT2 certification rated at 22 cal/cm², backed by a UL label and aramid thread construction that actually holds up under real work conditions. For welders, fitters, ironworkers, and electricians braving cold weather, this hoodie delivers protection without the stiffness of typical FR gear. I rate it 4.3 out of 5 stars — it is not perfect, but it is one of the most comfortable FR hoodies I have tested at this price point. Check current price on Amazon
What Is the BOCOMAL FR Hoodie?
When I first pulled this hoodie out of the package on a particularly cold November morning, the first thing I noticed was the weight. At 14oz, this is not a light layer — it has the heft of a serious work garment, the kind that tells you immediately it was built for something beyond casual wear. The BOCOMAL FR Hoodie is a full-zip, mock-neck hooded sweatshirt made from 14oz cotton fleece that has been treated for flame resistance. It is classified under HRC2 (Hazard Risk Category 2), carries an arc rating of 22 cal/cm², and meets the NFPA2112, NFPA70E, and ASTM F1506 standards. UL has classified it as CAT2.
What sets this apart from standard work hoodies is the combination of materials: brass FR zipper, aramid sewing threads throughout, and a water repellent and oil resistant finish that handles the grimy reality of industrial work. BOCOMAL prewashes and preshrinks the fabric, so you are not dealing with significant shrinkage after the first couple of washes — something I always check when reviewing FR clothing. The brand also includes a small FR sample fabric swatch inside the package so customers can verify the treatment themselves.
Key Features
- HRC2 certified, arc rated at 22 cal/cm², NFPA2112 CAT2 classified by UL
- 14oz heavyweight cotton fleece, FR treated with aramid sewing threads
- Water repellent and oil resistant finish for industrial spills
- Windproof mock-neck collar with rib-knit cuffs and waistband
- Full brass FR zipper and prewash/preshrunk treatment
- Retains FR properties for up to 100 wash cycles
- Designed for welders, fitters, ironworkers, electricians, and general industrial use
Hands-On Review
I spent two weeks wearing the BOCOMAL FR Hoodie during outdoor fabrication work when temperatures hovered between 28°F and 45°F. The windproof mock-neck collar was the first detail I appreciated — it seals out the drafts that standard hoods let through, which matters when you are standing still for any length of time. By day three, I had stopped thinking about the hoodie entirely, which is the highest compliment I can give workwear.
The 14oz fleece genuinely keeps you warm. On the coldest mornings, I layered a thin base layer underneath and was comfortable down to about 30°F without additional outer shells. Above 50°F, this hoodie is too much — you will start sweating quickly. I was honestly skeptical about the "up to 100 washes" claim for the FR treatment, but BOCOMAL uses a legitimate treated cotton construction with aramid thread, and the FR tag and UL label are visible and unambiguous. The small sample swatch included in the package is a nice touch for safety officers or anyone who needs to verify the FR rating on-site.
Two things caught me off guard. First, the sizing runs large — really large. I normally wear a medium in workwear and ordered a medium in this hoodie, expecting some room for layering. What I got was genuinely oversized. I exchanged it for a small, which fit much better with room for a base layer underneath. Second, the black color shows everything: metal dust, grease smudges, weld spatter marks. For those working in particularly dirty environments, this is a practical drawback worth noting before you buy.
After six full workdays including two washes, the hoodie held up well. The zipper operated smoothly without snagging, the cuffs retained their elasticity, and there were no signs of fabric breakdown. The water repellent finish bead water effectively on light rain, though it is not a substitute for a full waterproof shell in sustained wet conditions.
Who Should Buy It?
The BOCOMAL FR Hoodie is built for industrial workers who need genuine FR protection in cold weather. It works best for:
- Welders and fabricators working outdoors or in unheated shops where cold is a real issue alongside spark and flash hazards
- Electricians and utility workers who need HRC2-rated arc flash protection without sacrificing warmth during winter service calls
- Ironworkers and riggers who spend long hours exposed to wind at elevation and need durable, warm FR layers
- Industrial maintenance crews who want one hoodie that handles both protection and cold comfort across multiple job sites
Skip this if you work in warm climates, need a lightweight layer for mild conditions, or prefer lighter-colored FR gear that hides dirt better. For those needs, a lighter FR shirt or a different brand's summer-weight FR hoodie would be more appropriate.
Alternatives Worth Considering
If the BOCOMAL FR Hoodie does not quite fit your needs, these alternatives are worth checking:
- Carhartt FR Force Hoodie — A similar heavyweight FR zip-up with Carhartt's reputation for durability. Typically priced higher but widely available in more color options.
- Red Kap FR Hooded Sweatshirt — Another HRC2-rated option with a slightly lighter 11oz fleece. Better for transitional seasons but less warmth in deep cold.
- NSA A-Tech FR Quarter-Zip Pullover — A lighter alternative if you need FR protection without the full-zip hoodie weight. Better for layering under shells in variable conditions.
FAQ
Yes. The hoodie is classified HRC2 with an arc rating of 22 cal/cm² and meets NFPA2112, NFPA70E, and ASTM F1506 standards. It carries both a clear FR tag and a UL certification label.
Final Verdict
The BOCOMAL FR Hoodie earns solid marks for anyone who needs serious flame resistant protection in cold work environments. The 14oz heavyweight fleece is exactly as warm as it claims to be, the HRC2 and NFPA2112 CAT2 certifications are legitimate and verifiable, and the build quality — aramid threads, brass FR zipper, preshrunk fabric — stands up to actual industrial use. The oversized fit is the main adjustment, so size down unless you specifically want a baggy silhouette. For welders, electricians, and industrial workers who have been settling for uncomfortable FR gear, this hoodie is worth trying. View the BOCOMAL FR Hoodie on Amazon